Skip to main content

Please Select Your Country/Language Preferences

nVent ERIFLEX FleXbus System

Subcategories

nVent ERIFLEX FleXbus Conductor

nVent ERIFLEX FleXbus Conductor

nVent ERIFLEX FleXbus Supports and Bracing System

nVent ERIFLEX FleXbus Supports and Bracing System

nVent ERIFLEX FleXbus HCBC Clamp and Plate for Power Supply Connection

nVent ERIFLEX FleXbus HCBC Clamp and Plate for Power Supply Connection

nVent ERIFLEX FleXbus Palm Extender for Switchboard Connection

nVent ERIFLEX FleXbus Palm Extender for Switchboard Connection

nVent ERIFLEX FleXbus IP55 Conductor Entry

nVent ERIFLEX FleXbus IP55 Conductor Entry

nVent ERIFLEX FleXbus Fire Barrier System

nVent ERIFLEX FleXbus Fire Barrier System

nVent ERIFLEX FleXbus Cutting and Stripping Tools

nVent ERIFLEX FleXbus Cutting and Stripping Tools

nVent ERIFLEX FleXbus IP2x Boots and Cover

nVent ERIFLEX FleXbus IP2x Boots and Cover

nVent ERIFLEX FleXbus Phases Identification Kit

nVent ERIFLEX FleXbus Phases Identification Kit

Products | 23 results (106 items)

PH40515.jpg image

nVent ERIFLEX FleXbus Conductor

PH32589.jpg image

nVent ERIFLEX FleXbus Aluminum Perforated Profile

nVent ERIFLEX FleXbus Aluminum Perforated Profile is designed for use with the nVent ERIFLEX FleXbus Support Kit. Punched holes in the aluminum profile allow the support to be fixed directly to the wall, ceiling, or cable tray.
PH40520.jpg image

nVent ERIFLEX FleXbus HCBC Clamp

nVent ERIFLEX FleXbus HCBC Clamp is used to fix the nVent ERIFLEX FleXbus Conductor on the transformer or power supply palm, without drilling. Its rigid design assures even contact pressure and is ideal for on-site modifications.
PH40523.jpg image

nVent ERIFLEX FleXbus Extender Type 1 Flat and Pre-Drilled

nVent ERIFLEX FleXbus Extender Type 1 Flat and Pre-Drilled is an optional tool which provides more connection possibilities for the nVent ERIFLEX FleXbus Connector.
PH40534.jpg image

nVent ERIFLEX FleXbus Foam Barrier FBS

nVent ERIFLEX FleXbus Foam Barrier FBS is a two-component, expanding polyurethane sealant that stops smoke and fire. It is used to seal component openings, openings with many penetrating elements, that are difficult to access or that are irregular.
PH40538.jpg image

nVent ERIFLEX FleXbus Stripper Cutter

nVent ERIFLEX FleXbus Stripper Cutter is designed for stripping nVent ERIFLEX FleXbus Conductor insulation without damaging the conductive multi-wire braid.
PH40541.jpg image

nVent ERIFLEX FleXbus Transformer Cover IP2X for 1 Conductor per Phase

nVent ERIFLEX FleXbus Transformer Cover IP2X for 1 Conductors per Phase is used if the power supply is not equipped with its own cover. Typically used for applications that require a power supply range of 400 to 1600kVA.
PH40516.jpg image

nVent ERIFLEX FleXbus Support Kit on Edge 3 Poles

nVent ERIFLEX FleXbus Support Kit on Edge 3 Poles is designed to support nVent ERIFLEX FleXbus Conductors. When used with the aluminum perforated profile, it allows conductors to be installed side-by-side or on top.
PH40521.jpg image

nVent ERIFLEX FleXbus HCBC Plate

nVent ERIFLEX FleXbus HCBC Plate is a tinned rigid copper part used to provide a strong electrical contact and maintain braid expansion during compression. It allows the nVent ERIFLEX FleXbus Conductor insulation to overlap on the connection palm.
PH40524.jpg image

nVent ERIFLEX FleXbus Extender Type 2 Flat and Plain

nVent ERIFLEX FleXbus Extender Type 2 Flat and Plain is an optional tool which provides more connection possibilities for the nVent ERIFLEX FleXbus Connector.